We all know how tough the game of golf can be. If you’re looking for the best Mid Handicapper Irons it’s likely you’ve been fine tuning your game for some time.
Well we’re hoping we can help you shave a couple extra strokes off your handicap with this guide to the best beginner irons.
There’s a few different criteria you must understand in order for us to match you with the best set of irons for your game.
We’ll breakdown each criteria so you can understand how it fits your swing and determine which clubs are best for you. The major criteria we’ll be looking into in this guide is Forgiveness, Flex, Weight, Structure.
Forgiveness, for those that don’t know is the measurement of how much room for error you have when making contact. To put it simply irons high in forgiveness allow for solid contact to be made on a large portion of the club face. While irons with low forgiveness tend to only have a smaller portion of the club face that will result in solid contact.
This means high forgiveness irons have a larger “sweet spot” as well as reduced hooks and slices with mishits. Though this does come at a price. When choosing an iron with low forgiveness you will tend to find it has less spin and control.
This is all due to the level of spin that is put on the ball when contact is made. In order to make a forgiving iron you must build it to reduce spin. By reducing spin you sacrifice controlled shots such as fades and draws as well as reducing your ability to stick the green.
All these factors are important to choosing the best Mid Handicapper irons as you must find your fit in this spectrum of forgiveness and control.
Each iron set we will include on our list will be targeted towards mid handicapers in terms of forgiveness. But in order to find your best fit you must determine where you stand with forgiveness and control.
Flex is another important factor that must be taken into account when choosing your irons.
Luckily for you choosing your flex is a fairly straightforward process and is based on swing speed.
By finding out your swing speed in MPH you can find which flex is suited for you. The rules of thumb are as follows.
Now there are several ways to measure your swing speed if you don’t know. You can have it tested on location but just by watching videos of swing such as “90 mph swing speed” you should be able to quite accurately see where you stand.
Finding the right flex is important for several reasons. Firstly it can generate more power to your swing as well as result in mis hits.
By finding the right flex for your swing speed your club should be able to increase its speed upon contact as the club is ideally flexing back into its normal position as contact is made. This increase in head speed results in more distance on the ball.
Though if an incorrect flex is chosen it can result in mishits or reduced distance. If your flex is to stiff you will miss out on the beneficial distance you will receive from a slight flex of the shaft.
If you choose a flex that is too high it may over-flex and result in a mis-hit.
The structure of irons is another criteria that should help you determine which iron best suits your game.
Cavity back irons are the most popular irons amongst high and mid handicappers. This design allows for a centre of gravity located low and back in the clubface.
This results in optimal launching and forgiveness.
This type of iron offers more forgiveness than any other build. Whether it’s in tough lies or mishits you will have more luck making solid contact with this type of iron than any other.
The cons with this form of iron is the lack of spin control. As stated earlier in the forgiveness section irons with this build will not be effective at sticking greens or controlling shots.
If you are a mid handicapper looking for a little more consistency out of your irons then your best bet may be to opt for cavity back irons.
Blade irons are more or less the opposite from cavity back irons. Blades irons are certainly used by a better demographic of players than cavity irons though that doesn’t mean they are better for you.
Blade irons have several features that can improve your game. Firstly they tend to have an increased distance over other iron builds. They also offer superior spin control, this is the biggest factor that makes this build of iron the most popular amongst pros.
The increased spin from these irons can come in serious handy when sticking greens.
These types of irons are best fit for you if you consistently hit the sweet spot on your iron shots. If you can do that you will find yourself sticking more greens with this advanced iron build.
Callaway Golf 2018 Men’s Rogue Irons Set
These Rogue Callaway Iron’s are our top choice for best irons for mid handicappers.
As one of the best selling irons on the market, these incredible clubs are great for a large range of players. If you’re looking to shave a few strokes off of your handicap this iron set is a great option.
- 360 Face Cup
- Tungsten Weighting
- Urethane Microspheres for Phenomenal Sound and Feel
360 Face Cup
The 360 face cup is the design used by Callaway on this iron set in order to produce a forgivable clubface.
They placed the weight of this iron along the perimeter of this club. As well as making the face of the club very thin. This promotes a helpful clubface.
It allows the face of the club to be more flexible. This increases ball speed regardless of where you hit on the face of the club. Traditional clubs are not able to generate flex unless it is hit in the sweet spot.
The tungsten weight is another interesting feature on these Callaway Irons. Tungsten is a material that ways twice as much as steel. This is helpful as it allows the club designers to place the weight precisely where they want.
Using this tungsten weighting they were able to place the weight in the lower back end of the clubface. This promotes a lower centre of gravity.
Lower centre of gravity on your clubs promotes more forgiveness as well as an easier launch when making contact with the ball.
As stated earlier this Callaway irons have a very thin clubface. Having a thin clubface can often result in vibration on your hands after making contact.
In order to reduce this, the engineers at Callaway used Urethane microspheres which resulted in reduced vibrations and a much friendly sound when hitting the ball.
Callaway Rogue Irons Consumer Reviews
The consumer reviews of this iron set were overwhelmingly positive with nearly all golfers finding these clubs to be a great stepping stone in improving their game.
The forgiveness was the most common subject touched upon in consumer reviews. Golfers were happy to say that these Callaway irons offered more forgiveness than their previous sets. This resulted in lower scores as golfers found there games to be much more consistent.
Increased distance when using these irons was another common theme. Anywhere from 6 to 20 on each iron golfers were surprised to find how much distance these irons added.
The beautiful look was something a few golfers touched on as they found these clubs to be visually pleasing. This, of course, is a more subjective feature.
The only negative issue we saw come on a few occasion was the sound of these clubs. Some found that they did not love the sound of these irons making contact with the ball.
Overall the consumer reviews of the product were very positive.
Rogue Irons Set Options
This Rogue Iron set is avaialble in with Senior, Regular, and Stiff shafts. If you are a typical mid handicap golfer you will likely opt for the regular shaft.
The pricing of this iron set usually sits around $450 though you can check out the current price here.
In terms of value, we found this to be a great price. These irons were debuted in 2018 so they have quite new technology but don’t carry the brand new price tag.
In conclusion, we found these Callaway Rogue Irons to be the best option for mid handicappers.
Taylormade M4 Iron Set
The Taylormade M4 Irons is our choice for the longest hitting irons for mid handicappers.
These incredibly designed irons are perfect for those golfers looking to hit long, high, straight, iron shots.
- Ribcor Technology
- Speed Pocket
- Face Slots
- Low-CG Design
Much like the previous Callway model the Taylormade has come up with a new technology to increase flexibility on their clubface.
This increase in distance as well as increases forgiveness in of the club. The flex of this iron’s clubface promotes straighter, higher, and longer shots.
Speed pocket technology is another feature to increase flexibility in the clubface. This feature specifically refers to the low face of the club.
This is the most common area on the club to mis hit. This increased flexibility ensures that even misthit balls come off the clubface as if it were hit in the sweet spot.
Yet another feature to improve flexibility and forgiveness. This feature focuses on missing the sweet spot by hitting too close to the heel and toe of the club.
By ensuring flexibility in these areas this ensures fewer slices and hooks. The flexing of the clubface reduces side spin, therefore, making a more consistently straight shot.
Low CG Design
The low CG ( centre of gravity) design is designed to improve the launch and forgiveness o this club.
By placing the centre of gravity at the low back end of the clubface golfers will be less likely to mishit the ball.
Taylormade M4 Irons Consumer Reviews
The consumer reviews of this M4 Taylormade iron set were quite positive.
One of the major points covered in reviews was the correction of mishits. Many golfers found that even when mishitting balls with this club they were still able to get some solid distance and keep their ball flight straight.
Now, this isn’t to say you can play a solid round consistently mishitting the ball. However when mist hits do occur you will still gain some distance as well as stay out of trouble.
The increased distance was another heavily covered review topic. Golfers found that each of there irons consistently had a considerable increase in distance with their irons.
Much of this increase in distance can be attributed to the flexible clubface increasing the distance of slightly miss hit shots.
The consistency of these Taylormade irons is another result of the flexible head face. A typical mid handicapper won’t be hitting the sweet spot with each iron shot so a forgiving set of irons like these were greatly appreciated.
The only issues we came across over a few reviews were issues with the iron heads coming loose. This seems to be more of an issue with the faulty products rather than actual by product of the club.
Overall consumers found this club to be a great option for mid handicappers looking for some distance and consistency.
M4 Iron Sets Options
The flex options on this iron sets includes options from women’s to senior, regular, and stiff.
As we mentioned earlier it is likley as a mid handicapper you will opt for a regular flex. Though if you swing speed is high enough you may want to go for the stiff.
In terms of club options these clubs can purchased from 4 Iron to pitching wedge or from 5 iron Sand wedge. Choosing between those options is up to your discretion.
The pricing of this iron set is slighlty higher than the avergae set of quality irons but we believe that it is for good reason.
Though these clubs come on the more expensive end the end product that they put out is in line with the price tag.
Usually priced around $550 you can check out the current price here.
Cobra F-Max One Length Iron Set
These Cobra One length irons are our top choice for mid handicappers with poor iron play. These Cobra clubs are designed specifically to help those who struggle with their iron play.
- Same Club Length Amongst All Irons
- Deeper Undercut Head Design
- Progressive Head Construction
Identical Club Length
The most interesting feature offered by these Cobra Irons is the length of the clubs. The Engineers at cobra worked to make a set of irons the regardless of angle , were identical in length
This was created in order to give the golfer more consistency amongst their swing. Many golfers tend to find their 7-iron to be their favourite club. That is why each of the irons in this set are built to be the length of a seven iron.
This is why we have chosen these irons as the top pick for golfers that struggle with irons.
You will lose some of the distance on your longer irons as the length of the club will be shorter. You may also lose some feel on your short approach shots as the shorter pitching and sand wedges may be easier to swing.
But with all the being said you will be able to consistently use the exact same swing amongst all your irons. This reduces the worry of trying to hit more difficult clubs like 4-irons.
Deeper Undercut Head Design
The lower profile clubhead lowers the centre of gravity to the back of the club.
By now you’ve probably noticed this is a common trend on this list. This is due to the significant advantage it offers golfers that are looking to improve the launch of their iron shots.
This head design also includes a flexing design that increases ball speed for off-centre hits.
Progressive Head Construction
This is an interesting feature that is necessary due to the one-length design of these irons. In order to make up for the lack of length in the club Cobra built the lower irons with different materials.
Irons 4-7 are built with harder stainless steel to increase speed and distance. While the irons 8-SW(sand wedge) use a softer to steel. This softer steel allows for more precision and little more forgiveness on their shots.
Cobra F-Max One Length Irons Consumer Reviews
The consumer reviews for this club were very positive although it was quite evident the typical user of this club was not looking for a top tier iron. The consumer reviews were from mid to high handicappers that had trouble with there irons in the past.
That being said for those that used these clubs it seemed to help considerably with the consistency of their iron game. This was due to the ease with which players had making proper contact with their iron shots.
Whether it was the head design, flexibility, or similar length of the club, golfers found that these irons brought out much more consistency in their shots.
The forgiveness of these clubs was also mentioned often as reviews stated making off centre contact with the ball but still seeing a relatively positive result.
Consumers all found this club great for slower swings speeds. The increased ball speed created by these irons is perfect for older golfers looking to gain a little more distance.
One of the knocks we saw throughout our review research was on the change in distances these clubs caused. Typically you will have to adjust with new irons but due to the same length club feature, these irons had a much larger change in distance.
Consumers also found that these clubs did not offer as much spin as other iron sets. This is helpful if you have issues slicing or hooking the ball. Though it will hinder your game if you are looking to hit fades and draws.
Cobra F-Max Iron Set Options
These Cobra irons are offered in a regular and senior flex. Having these two options further proves that these irons are for mid to high handicappers.
If you have a fast swing speed these irons likely aren’t for you.
These only come with one option in terms of club selection and that is a 6 – PW set.
Pricing – Cobra F-Max Irons
One of the perks of these clubs is that they are very fairly priced. If you’re looking to improve your irons and not make a large financial investment these are a great option.
Usually priced around $250 this iron set is a great value buy. You can check out the current price here.
Titleist 718 AP2 Iron Set
This Titleist iron set is for those mid handicappers looking to take the next step in their game. These are extremely high-quality irons and offer more control than any other iron sets on this list.
We found this iron set to be bet for those mi handicappers that are proficient with their irons and are looking for a little more control and spin on their iron shots.
- CG Progression
- Perimeter Weighting
- Tour Prefered Profile
The CG progression of these clubs is a great feature that ensures the golfer maintains consistency throughout his clubs.
As you get down to the lower longer irons you will find that the Titleist engineers have more the CG (centre of gravity) to the lower back end of the club.
This is something done or easier to hit irons in order to increase forgiveness and launch. This makes the distance of the lower clubs more consistent.
The CG is placed in different areas on the higher irons as those clubs are designed to create spin and stick greens more effectively.
The perimeter weighting is another feature used to create more forgiveness in the longer irons.
Tungsten weights are placed in the toe and the heel of the club in order to create more distance on off-centre hits.
Tour Preferred Profile
The tour preferred profile is in regards to the look of this iron set. These clubs upon address have the ideal look that high tier players want. This may be one of the reasons these are the top used irons on the tour.
This iron set also has a professional sound when making contact with the ball.
Titleist AP2 Options
The shafts tend to be made out of iron but the beauty of this club is that titileist prefers it to be custom fit.
This ensures that your Titleist clubs fit your swing and body perfectly, giving you optimal results.
Pricing Titleist Ap2 Irons
These irons offer incredible quality to their users, unfortunately, you must pay for it.
These Titleist clubs do not come cheap but the quality and brand name that this product offers is well worht it’s high price tag.
Usually priced at $1,200 you can check out the current price here.
Best Irons For Mid Handicappers
We hope you enjoyed our buying guide for best irons for mid handicappers.